Re-Arm Kit G 25G Manual 3/8 Threads
Re-arming kits are essential as they add another season of use to your inflatable life jacket. This Leland kit contains one 25-gram CO2 cylinder with 3/8 threads, a green pin, and step-by-step re-arming instructions. Make sure to check your inflatable life jackets owners manual and the re-arming kit ensuring they are a match. Using the wrong re-arming kit can be dangerous.
Features:
- For re-arming inflatable life vests
- Use with Manual Pull PFD devices
- Do not use with self-inflating PFD
- Includes one 25-gram CO2 cylinder with 3/8 threads, Green Indicator Pin, and Instructions
- UL Marine Classified
CAUTION: This product can only be used one time. Once the CO2 cartridge is punctured to inflate the vest, it must be replaced.
WARNING: Use only with specified PFD Models. This gas cylinder is under pressure, therefore misuse can be dangerous. Do not incinerate, expose to sun or store above 120F (50C). Do not throw into open fire or dump at sea. Keep away from children. Dispose of gas cylinders only when empty. Discharge and dispose of corroded or rusty cylinders.
WARRANTY: Gas Filled Cylinders-We warranty all of our gas filled cylinders to and be free from defects and leakage for up to three years, depending upon storage conditions. Cylinders with a crimped closure, usually N20, O2 or Propane filled must not be stored below 40F as this may damage the seal. Custom made cylinders are not returnable. There is a 25% restocking fee for all other returned cylinders. Credit for punctured cylinders is not permitted unless a faulty Leland valve is returned with same.
Ensure the longevity and reliability of your inflatable life jacket with the Leland Maximum Inflation Re-Arm Kit G 25G Manual 3/8" Threads. This essential re-arming kit is designed to add another season of use to your life jacket, keeping you safe and prepared for any water adventure. The kit includes a 25-gram CO2 cylinder with 3/8 threads, a green indicator pin, and easy-to-follow re-arming instructions. Always refer to your inflatable life jacket's owner's manual to confirm compatibility with this re-arming kit, as using the wrong kit could pose safety risks.
Safety is paramount, and this re-arm kit is UL Marine Classified, ensuring it meets stringent safety standards. Please note that this product is designed for one-time use; once the CO2 cartridge has been activated, it must be replaced. Additionally, it is important to use this kit only with specified manual pull PFD devices and never with self-inflating models. Take the necessary precautions and store this product appropriately to maintain its integrity and efficacy for your next outing.
Features:
* For re-arming inflatable life vests: For re-arming inflatable life vests
* Compatible with Manual Pull PFD devices: Compatible with Manual Pull PFD devices
* Not suitable for self-inflating PFDs: Not suitable for self-inflating PFDs
* Includes one 25-gram CO2 cylinder with 3/8 threads, Green Indicator Pin, and Instructions: Includes one 25-gram CO2 cylinder with 3/8 threads, Green Indicator Pin, and Instructions
* UL Marine Classified for safety assurance: UL Marine Classified for safety assurance
