Re-Arm Kit M 16G Manual 3/8 Threads
Re-arming kits are essential as they add another season of use to your inflatable life jacket. This Leland kit contains one 16-gram CO2 cylinder with 3/8 threads, a green pin, and step-by-step re-arming instructions. Make sure to check your inflatable life jackets owners manual and the re-arming kit ensuring they are a match. Using the wrong re-arming kit can be dangerous.
Features:
- For re-arming inflatable life vests
- Use with Manual Pull PFD devices
- Do not use with self-inflating PFD
- Includes one 16-gram CO2 cylinder with 3/8 threads, Green Indicator Pin, and Instructions
- UL Marine Classified
CAUTION: This product can only be used one time. Once the CO2 cartridge is punctured to inflate the vest, it must be replaced.
WARNING: Use only with specified PFD Models. This gas cylinder is under pressure, therefore misuse can be dangerous. Do not incinerate, expose to sun or store above 120F (50C). Do not throw into open fire or dump at sea. Keep away from children. Dispose of gas cylinders only when empty. Discharge and dispose of corroded or rusty cylinders.
WARRANTY: Gas Filled Cylinders-We warranty all of our gas filled cylinders to and be free from defects and leakage for up to three years, depending upon storage conditions. Cylinders with a crimped closure, usually N20, O2 or Propane filled must not be stored below 40F as this may damage the seal. Custom made cylinders are not returnable. There is a 25% restocking fee for all other returned cylinders. Credit for punctured cylinders is not permitted unless a faulty Leland valve is returned with same.
Ensure the longevity of your inflatable life jacket with the Leland Maximum Inflation Re-Arm Kit M. This essential kit is designed to replace the CO2 cylinder in your manual pull life vest, allowing for another season of safe use. Each kit includes a 16-gram CO2 cylinder with 3/8" threads, a green pin for easy indication, and comprehensive re-arming instructions. Always refer to your life jacket's manual to confirm compatibility with this re-arm kit, as using the wrong components can present safety risks.
The Leland Maximum Inflation Re-Arm Kit M is specifically made for use with manual pull personal flotation devices (PFDs) and is UL Marine Classified for quality assurance. Please note that this product is intended for one-time use only; once the CO2 cartridge is activated, it must be replaced to maintain functionality. This kit is crucial for ensuring your safety while enjoying water activities, so keep it on hand for your next adventure.
Features:
* For re-arming inflatable life vests: For re-arming inflatable life vests
* Compatible with manual pull PFD devices only: Compatible with manual pull PFD devices only
* Not suitable for self-inflating PFDs: Not suitable for self-inflating PFDs
* Includes one 16-gram CO2 cylinder, green indicator pin, and instructions: Includes one 16-gram CO2 cylinder, green indicator pin, and instructions
* UL Marine Classified for safety and reliability: UL Marine Classified for safety and reliability
