Re-Arm Kit O 24G Manual 1/2 Threads
Re-arming kits are essential as they add another season of use to your inflatable life jacket. This Leland kit contains one 24-gram CO2 cylinder with 1/2 threads, a green pin, and step-by-step re-arming instructions. Make sure to check your inflatable life jackets owners manual and the re-arming kit ensuring they are a match. Using the wrong re-arming kit can be dangerous.
Features:
- For re-arming inflatable life vests
- Use with Manual Pull PFD devices with 840 Series Inflator
- Do not use with self-inflating PFD
- Includes one 24-gram CO2 cylinder with 1/2 threads, one Green Indicator Pin, and Instructions
- UL Marine Classified
CAUTION: This product can only be used one time. Once the CO2 cartridge is punctured to inflate the vest, it must be replaced.
WARNING: Use only with specified PFD Models. This gas cylinder is under pressure, therefore misuse can be dangerous. Do not incinerate, expose to sun or store above 120F (50C). Do not throw into open fire or dump at sea. Keep away from children. Dispose of gas cylinders only when empty. Discharge and dispose of corroded or rusty cylinders.
WARRANTY: Gas Filled Cylinders-We warranty all of our gas filled cylinders to and be free from defects and leakage for up to three years, depending upon storage conditions. Cylinders with a crimped closure, usually N20, O2 or Propane filled must not be stored below 40F as this may damage the seal. Custom made cylinders are not returnable. There is a 25% restocking fee for all other returned cylinders. Credit for punctured cylinders is not permitted unless a faulty Leland valve is returned with same.
Ensure your safety on the water with the Leland Maximum Inflation Re-Arm Kit O 24G Manual 1/2" Threads. This essential re-arming kit is designed specifically for inflatable life jackets, allowing you to extend their use for another season. The kit includes a high-quality 24-gram CO2 cylinder with 1/2 threads, a green indicator pin, and clear instructions for re-arming your PFD. Always refer to your inflatable life jacket's owner manual to confirm compatibility with the re-arming kit, as using the incorrect kit can lead to dangerous situations.
Crafted with safety in mind, this re-arm kit is UL Marine Classified, ensuring it meets rigorous safety standards. The kit is intended for use with manual pull personal flotation devices that utilize the 840 Series Inflator. Remember, this product is designed for single-use only; once the CO2 cartridge has been activated, it must be replaced immediately. Follow all safety precautions and dispose of cylinders properly to maintain a safe boating experience.
Features:
* For re-arming inflatable life vests: For re-arming inflatable life vests
* Compatible with Manual Pull PFD devices using the 840 Series Inflator: Compatible with Manual Pull PFD devices using the 840 Series Inflator
* Not suitable for self-inflating PFDs: Not suitable for self-inflating PFDs
* Includes one 24-gram CO2 cylinder with 1/2 threads, one Green Indicator Pin, and detailed instructions: Includes one 24-gram CO2 cylinder with 1/2 threads, one Green Indicator Pin, and detailed instructions
* UL Marine Classified for safety and reliability: UL Marine Classified for safety and reliability
