Re-Arm Kit ZZ2 24G Auto 1/2 Threads
Re-arming kits are essential as they add another season of use to your inflatable life jacket. This Leland kit contains one 24-gram CO2 cylinder with 1/2 threads, green pin, bobbin, and step-by-step re-arming instructions. Make sure to check your inflatable life jackets owners manual and the re-arming kit ensuring they are a match. Using the wrong re-arming kit can be dangerous.
Features:
- For re-arming inflatable life vests
- Use with Auto/Manual Pull PFD devices
- Includes one 24-gram CO2 cylinder with 1/2 threads, Green Indicator Pin, Yellow Bobbin/Water Sensing Element, and Instructions
- UL Marine Classified
CAUTION: This product can only be used one time. Once the CO2 cartridge is punctured to inflate the vest, it must be replaced.
WARNING: Use only with specified PFD Models. This gas cylinder is under pressure, therefore misuse can be dangerous. Do not incinerate, expose to sun or store above 120F (50C). Do not throw into open fire or dump at sea. Keep away from children. Dispose of gas cylinders only when empty. Discharge and dispose of corroded or rusty cylinders.
WARRANTY: Gas Filled Cylinders-We warranty all of our gas filled cylinders to and be free from defects and leakage for up to three years, depending upon storage conditions. Cylinders with a crimped closure, usually N20, O2 or Propane filled must not be stored below 40F as this may damage the seal. Custom made cylinders are not returnable. There is a 25% restocking fee for all other returned cylinders. Credit for punctured cylinders is not permitted unless a faulty Leland valve is returned with same.
Ensure your safety on the water with the Leland Maximum Inflation Re-Arm Kit V85000-84204Z, specifically designed for inflatable life jackets. This essential kit includes a 24-gram CO2 cylinder with 1/2" threads, a green indicator pin, a yellow bobbin for water sensing, and easy-to-follow re-arming instructions. Designed for both automatic and manual pull personal flotation devices (PFDs), this re-arm kit allows you to extend the lifespan of your life jacket, ensuring you*re always prepared for your aquatic adventures.
Using the correct re-arming kit is crucial for safety. Always refer to your inflatable life jacket's owner's manual to confirm compatibility with the Leland Maximum Inflation kit. This product is UL Marine Classified, ensuring it meets stringent safety standards. Remember, after use, the CO2 cartridge must be replaced, as this kit can only be utilized once. Follow safety warnings to avoid misuse, and always store your kit properly to maintain its integrity.
Features:
* For re-arming inflatable life vests: For re-arming inflatable life vests
* Compatible with Auto/Manual Pull PFD devices: Compatible with Auto/Manual Pull PFD devices
* Includes one 24-gram CO2 cylinder with 1/2 threads, Green Indicator Pin, Yellow Bobbin/Water Sensing Element, and Instructions: Includes one 24-gram CO2 cylinder with 1/2 threads, Green Indicator Pin, Yellow Bobbin/Water Sensing Element, and Instructions
* UL Marine Classified for safety assurance: UL Marine Classified for safety assurance
